Solana Gear Heated Vest

1. Charge your power bank or battery fully.
2. Place it in the inner zip pocket and connect the vest’s USB plug. Use a 5V/2A output port.
3. If your power bank has a power button, turn it on.
4. Press and hold the vest’s chest power button for 3 seconds. It will cycle colors, then show a slow flashing red - this is the preheat phase (up to 5 minutes).
5. After preheating, the vest switches to Medium automatically and the button glows solid white.
6. Tap the button to change heat level:
   
   • Solid Red = High
   • Solid White = Medium
   • Solid Blue = Low
7. To power off, press and hold the chest button for 3 seconds.

Troubleshooting

1. Vest power button fast flashing red after the power bank is plugged in and no heat.
   • Use a compatible power source. The vest requires a 5V/2A power bank; if the port is 1A or lower, the vest will not work.
   • Check the USB connection inside the pocket. Unplug and firmly plug it back in. Try a different port on the power bank if available.
2. No light on the vest button
   • The power bank may be off or empty. Charge it and try again. If your bank has a power button, turn it on.

• Preheating may be slower in very cold environments. Keep the vest zipped and close to your body.
• You do not have to wait for the preheat phase to finish before switching to your preferred setting. While the button is slow flashing red in preheat mode, you can select High, Medium, or Low. The button will show a solid color for your choice, and the vest will heat to that setting after preheat completes.

---

Still need help? Create a support request with our customer service team and we'd be happy to help.